This blender cannot heat soups from cold ingredients or blend hot ingredients. The containers are not intended for hot blending. Please note, after you blend cool ingredients, it can be poured into a saucepan to heat up if desired.
Auto-iQ Blend and Auto-iQ Ultra Blend have been designed specifically for use with the Nutri Ninja Cups.
Auto-iQ Blend is a shorter program that is perfect when using ingredients such as fresh fruit, yogurt, and leafy greens, like spinach.
The Auto-iQ Ultra Blend is a slightly longer program designed for breaking down tougher ingredients, such as frozen fruit, ice, kale, seeds, and nuts.
Product care & maintenance
Hand Washing: Wash the containers, lids, and blade assemblies, in warm, soapy water. When washing the blade assemblies and blade discs, use the provided cleaning brush or a dishwashing utensil with a handle to avoid direct hand contact with blades. Handle blade assemblies with care to avoid contact with sharp edges. Rinse and air-dry thoroughly.
Dishwasher: The containers, lids, and blade assemblies, are all top-rack dishwasher safe. Ensure that the blade assemblies are removed from the containers before placing them in the dishwasher.
Motor Base: Use a damp cloth to wipe the motor base clean. Never submerge the motor base in water.
Make sure the surface and the suction feet are wiped clean. The suction feet will only stick to smooth surfaces. The suction feet will not stick on some surfaces (wood, tile, and non-polished finishes).
Do not attempt to use appliance when the motor base is stuck to a surface that is not secure (cutting board, platter, plates, etc.).
Each program has been designed specifically for the jar attached to the base. Certain programs will only work when certain jars are attached. If the program light does not illuminate when the jar is attached, that program will not run and you will get an ERR message on the display.
All of our Auto-iQ programs are timed to finish on their own so you don't have to stand there and watch to make sure your results come out great. The speeds (low, med, hi), however, will start counting from 0 and count up until the auto-shut off is reached.
This can be caused by the container being overfilled. Carefully remove some ingredients and try again. Be sure not to fill the containers above the MAX fill line.
This may also be caused by the unit being overheated. When the thermal protection has been activated, unplug the unit. Allow it to cool for 15 minutes before plugging it back in.
Make sure the container is securely placed on motor base.
Make sure the lid is securely on container in the correct position (align arrows).
The appliance is turned “Off”. Press the power button ( ) to turn “On”.
Check that the plug is securely inserted into the electrical outlet.
Check the fuse or circuit breaker.
The unit has overloaded. The appliance will stop and the power light will flash. Unplug and wait approximately 15 minutes before using again.
The unit has overheated. Unplug and wait approximately 15 minutes before using again.
Check to make sure the unit is not overloaded.
Either you are chopping too much food at one time, or the pieces are not of even size and processing smaller amounts per batch.
The food has been over processed. Use Auto-iQ™ Pulse button for controlled processing. Food Collects On Lid or On the Sides of the Container. The mixture is too thick. Add more liquid.
Do not use ice that has been sitting out or has started to melt. Use ice straight from the freezer. Start with a few pulses and then go to a continuous blending cycle.
Make sure surface and suction feet are wiped clean. Suction feet will only stick to smooth surfaces. Suction feet WILL NOT stick on some surfaces such as, wood, tile and non-polished finishes. DO NOT attempt to use appliance when the motor base is stuck to a surface that is not secure, (cutting board, platter, plates, etc.).
Your Ninja is able to detect which jar is on the base. You may be trying to use a program that is not designed for the jar you have installed. The programs will light up indicating which programs are available for each jar.
The unit is not installed properly. For your safety the unit will only be able to be turned on when it is properly assembled. Please refer to the assembly pages of this inspiration guide for assistance.
First nameLast nameSubmitRegistered WarrantyYour information has been updated successfullySomething went wrong, please try again!These fields can not be empty, must be checked, or have to be valid