1. Blend 2. Crush 3. Mix 4. Powermix

Pulse, START/STOP.

All parts (except the base) are dishwasher safe.

Hand-Washing
Wash containers, lids and blade assembly in warm, soapy water. Use a dishwashing utensil with handle to avoid direct contact with the blades. Exercise care when handling the blade assembly as the blades are sharp. Thoroughly rinse and air-dry all parts.
STUCK-ON INGREDIENTS IN THE POWER NUTRI™ BOWL
For stuck-on ingredients, such as nut butter, rinse the bowl and blade assembly under warm water. Next, fill the bowl with warm water up to the top of the Power Paddle and add 1–2 small drops of washing-up liquid. Screw on the blade assembly and press MIX. Twist the Power Paddle anti-clockwise continuously while cleaning. Then, empty contents and rinse under warm water and wipe with a dishwashing utensil, if needed.

Dishwasher
Containers, lids and blade assembly are ONLY dishwasher safe on the top rack. Ensure the blade assembly and lid are removed from the container before placing in the dishwasher.

Motor Base
Unplug the unit before cleaning. Wipe motor base with a clean, damp cloth.

For cord storage, wrap cord with hookand- loop fastener near the back of the motor base. DO NOT wrap the cord around the bottom of the base for storage. DO NOT store blended or unblended
ingredients in the cup or bowl with the blade assembly attached. Use only the spout lid or storage lid when storing blended or unblended ingredients in the containers.

DO NOT stack items on top of the containers. Store any remaining attachments alongside the unit or in a cabinet where they will not be damaged or create a hazard.

Make sure unit is plugged in. If the unit is powered on and no container is installed, the unit will display ‘- -’. The available programs will illuminate after placing a container on base and rotating it clockwise until it clicks into place.

Remove container from base by rotating it anti-clockwise and lifting it up. The display with flash ‘- -’. Unplug the power cord from the socket. If the unit remains plugged in, the display will time out after 3 minutes of inactivity. Press any button to wake the unit.

Using the Auto-iQ® programs is the easiest way to achieve great results. The pulses and pauses allow the ingredients to settle toward the blade assembly. If ingredients are routinely getting stuck, adding some liquid will usually help.

When filling the cup, start with fresh fruit or vegetables, then leafy greens or herbs. Next add liquids or yogurt, then seeds, powders or nut butters. Finally, add ice or frozen ingredients.

If using the Power Nutri™ Bowl, during the blending process twist the Power Paddle anti-clockwise continuously to circulate ingredients.

Make sure the counter and feet of the unit are clean and dry.

Set the container on a level surface. Carefully place the lid or blade assembly on the top of the container and align the threads so the lid/blade assembly sits flat. Twist clockwise until you have a tight seal.